Dongguan Hardware Co., Ltd.
Service Hotline:0769-89061116
Banner
ProductsYou are here: Home > Products > Display Shaft Customization
Dongguan Display Shaft
Dongguan Display Shaft

Dongguan Display Shaft

  Monitor HingeFactory parameter:

Model:Ts-006-1

Specifications:47.7*13.5Mm,

Material:sk7+1215

Torque:3.5-4.0kgf-cm(Large torsion direction)

Life: Life Requirements20000Times, the attenuation rate is not greater than20%

Characteristics:135Degree of rotation, high life

Application scope: Slim Notebook

Whether to provide customization: Is

  Monitor HingeFactory Technical Requirements:

1.Product Torque Requirements:3.5-4.0kgf-cm(Large torsion direction)

2.Rotation angle: Rotate-5~135Degree-5degree self-locking, shipping angle135Degree

3.Product Life Requirements20000Times, the attenuation rate is not greater than20%

4.The retention frame must be fixed firmly with the rotating shaft, and cannot be loose off phenomenon

5.All processes must comply with environmental requirements

6.Take*Number size for key control

Monitor Hinge: Hinges connecting the monitor panel and the base assembly. Depending on your needs, you can use different materials and set different forward tilt angles. The principle is to provide an operation indication between the rotary switch or the hinge joint of the potentiometer, and the monitor cable is extended to the external monitoring instrument through the rotating shaft connecting the rotary switch or the potentiometer terminal. An optional power transmission line transmits signals through a shaft gap.


Mobile